Genuine Whirlpool Thermistor W11724692

Genuine Whirlpool Thermistor | OEM Part Number: W11724692

Whirlpool W11724692 is a genuine OEM thermistor. A thermistor is a temperature-sensing component whose resistance changes with temperature, providing temperature feedback to an appliance's control system. Confirm this exact part against your full appliance model number before ordering.

Technical Specifications

Symptoms Fixed by Replacing W11724692

These are typical thermistor-related symptoms, not a diagnosis or a guarantee. Replace this part only when testing and model-specific service information identify it as faulty.

• Incorrect temperature feedback: The control receives an inaccurate temperature reading from a failed sensor.
• Temperature-control problems: Operation is affected by incorrect sensor feedback.
• Sensor-related fault: Model-specific diagnostics identify a thermistor or temperature-sensor circuit issue.

Key Product Benefits

• Genuine Whirlpool OEM component.
• Clearly identified by manufacturer part number W11724692.
• Replaces a failed thermistor when model compatibility and diagnosis are confirmed.

Part Compatibility & Cross-Reference Numbers

OEM Part Number: W11724692

Please verify fitment using your appliance's full model number before purchasing.

Step-by-Step Installation Instructions

Safety: Unplug the appliance or disconnect power at the circuit breaker before servicing. Allow hot components to cool. Follow model-specific safety procedures and use a qualified technician if unsure.

1. Confirm W11724692 is the correct thermistor for your full appliance model number.
2. Use the model-specific service instructions to locate and safely access the sensor.
3. Photograph the original mounting position and wire routing before removal.
4. Carefully release the connector and remove the sensor according to the appliance's service instructions. Do not pull on the wires.
5. Fit the replacement in the original position, secure it as specified, and reconnect the wiring without pinching or stressing it.
6. Reinstall access panels, restore power, and complete the model-specific operational checks or diagnostic procedure.