Dishwasher Door Latch Assembly 10022250 00623797

Dishwasher Door Latch Assembly

This genuine Bosch 10022250 door latch assembly secures the dishwasher door in the closed position and signals the control board that the door is latched. It replaces earlier part numbers 10012042 and 00623797. A faulty door latch prevents the dishwasher from starting or causes it to stop mid-cycle. This OEM replacement restores proper door engagement and allows normal wash cycle operation.

Technical Specifications

Symptoms Fixed by Replacing 10022250

• Dishwasher will not start: The door latch does not engage, so the control board does not detect a closed door.
• Door will not stay closed: Broken or worn latch mechanism allows the door to pop open during operation.
• Cycle stops mid-wash: Intermittent latch connection causes the control to pause the cycle.
• Error code displayed: Door latch fault codes appear on the control panel.

Installation Instructions

1. Disconnect power to the dishwasher at the circuit breaker or unplug it.
2. Open the dishwasher door and remove the inner door panel screws along the top and sides.
3. Carefully separate the inner door panel from the outer door to access the latch assembly.
4. Disconnect the wire harness from the old latch and remove it from the door.
5. Install the new 10022250 latch and reconnect the wire harness.
6. Reassemble the door panels and secure all screws.
7. Restore power and run a test cycle to confirm the door latches properly and the cycle completes.