Genuine Frigidaire Washer Fill Hose 5304533220

Genuine Frigidaire Washer Fill Hose | OEM Part Number: 5304533220

Frigidaire 5304533220 is a genuine washer fill hose for compatible water-supply applications. Verify your complete washer model and required hose configuration before ordering. Hose length, fitting size, construction, and included seals are not specified here.

Technical Specifications

Symptoms to Check

• Leakage at the hose or connections.
• Visible cracking, bulging, or other hose damage.
• Restricted filling when inspection confirms a hose obstruction or fault.

Filling problems can also result from supply valves, inlet screens, inlet valves, or other faults. Replacement is not a guaranteed cure. Stop using a damaged or leaking hose and shut off the water supply.

Key Product Benefits

• Genuine Frigidaire manufacturer component.
• Washer water-supply hose application.
• Exact OEM number supports replacement matching.

Part Compatibility & Cross-Reference Numbers

OEM number: 5304533220.

Please verify fitment using your appliance's full model number before purchasing. Confirm hose length, connections, routing, and required seals against manufacturer documentation. Brand tags alone do not establish compatibility.

Step-by-Step Installation Instructions

1. Disconnect washer power and close the water-supply valves.
2. Prepare towels and a container for residual water, then remove the old hose using the model-specific procedure.
3. Inspect the connection surfaces and install the seals specified by the manufacturer.
4. Attach the correct hose without cross-threading. Tighten according to manufacturer instructions; do not assume a universal additional quarter turn.
5. Route without kinks, stretching, or contact with sharp edges.
6. Open the water supply gradually, inspect both connections for leaks, and complete the prescribed operating checks.

Use a qualified installer if connection requirements or safe access are uncertain.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov