Ez-Flo 43251 #4 Hose Clamp

Ez-Flo 43251 #4 Hose Clamp

Ez-Flo 43251 is a hose clamp identified with the size designation #4. Match the required clamp size and application specifications before replacing original hose-fastening hardware.

Technical Specifications

Replacement Applications

• Damaged original clamp: Replace damaged fastening hardware after confirming required clamp specifications.
• Loose hose connection: Inspect the hose, fitting, and clamp to identify the cause before replacing hardware.

Key Features

• Clearly identified #4 size designation.
• Ez-Flo manufacturer part number 43251.
• Hose-fastening hardware for applications requiring matching clamp specifications.

Part Identification & Compatibility

Manufacturer part number: 43251

Confirm required clamp size, hose outside diameter, and application requirements before ordering. Part number and size designation alone do not establish compatibility with every hose or appliance.

Installation Guidance

Safety: Shut off the connected system and isolate its supply before servicing. Allow hot components to cool and relieve pressure according to the equipment manufacturer's instructions. Disconnect electrical power when servicing an appliance.

1. Confirm the clamp specification required for the hose connection.
2. Inspect the hose and mating fitting for damage.
3. Remove the original clamp using the equipment's service instructions.
4. Seat the hose and position the replacement clamp as specified by the manufacturer.
5. Secure it to specified tightening requirements without damaging the hose.
6. Restore the system and check for leaks or movement as directed by the service instructions.