Genuine ACP M0805205 30A Commercial Microwave Fuse For: Amana, Menumaster M0805205 AMAM0805205 AMA0805205 0805205 805205 AMA805205 AMA53001667 AMA56001476

Genuine ACP M0805205 Fuse | OEM Part Number: M0805205

This 30A fuse is listed for compatible ACP, Amana, and Menumaster commercial microwave and high-speed combination oven models. A failed fuse may interrupt power or prevent a cooking cycle. Check the appliance’s full model and required fuse specification before ordering.

Technical Specifications

Symptoms Fixed by Replacing M0805205

• Complete unit shutdown: Display stays dark and the controls do not respond.
• Failure to heat or start: The unit powers on, but the cooking cycle will not begin or stops immediately.
• Tripped breaker or blown fuse: The appliance cuts out during a high-power microwave or convection cycle.
• Physical fuse damage: Visible burnout, discoloration, or a broken filament.

Repeated fuse failure can indicate an underlying electrical fault and requires diagnosis by a qualified technician.

Key Product Benefits

• ACP fuse identified by part number M0805205.
• 30 A rating listed for the supported commercial equipment.
• Cross-reference numbers and model information are included to help verify fitment.

Part Compatibility & Cross-Reference Numbers

Listed part numbers: M0805205, AMAM0805205, AMA0805205, 0805205, 805205, AMA805205, AMA53001667, AMA56001476.

Compatible brands listed: ACP, Amana, Menumaster.

• XpressChef / AXP Series: AXP22T, AXP20, AXP22TLT-P2005602M, ARX1-P2005701M
• MXP Series: MXP22QTT-P2006809M, MXP22BFT-P2004227M, MXP22SFTN-P2006837M, MXP5221T-P2005621M, MXP22DMT-P2006807M
• MRX Express Series: MRX52BL (P2006615M), MRX2SW (P2006645M)
• MSO / RFS / DECS / MC Series: MSO5211-P2003927M, RFS18TS-P2001003M, DECS11MA-P1330217M, MC23MPT-P1329605M, MC23MPTW2-P2001808M, RCS10MPA-P2000704M, US11EA-P1330229M

Please verify fitment using your appliance’s full model number before purchasing.

Step-by-Step Installation Instructions

Safety warning: Commercial microwaves contain high-voltage components that can remain dangerous after power is disconnected. Installation should be performed by a qualified service technician following the manufacturer’s service procedure. Do not attempt to discharge or handle high-voltage components unless properly trained.

1. Confirm the appliance’s full model number and required fuse specification in the service documentation.
2. Disconnect power according to the manufacturer’s safety and lockout procedures.
3. Have a qualified technician access the fuse assembly and follow the prescribed high-voltage safety procedure.
4. Remove the failed fuse only after the equipment has been made safe using the manufacturer’s procedure.
5. Install the specified M0805205 fuse; do not substitute a different rating.
6. Reassemble the appliance and test it according to the service manual.
7. If the replacement fuse blows again or the breaker trips, stop and have the underlying fault diagnosed.