Genuine ACP 12A Commercial Microwave Fuse For: Amana, Menumaster M0805105 AMAM0805105 AMA0805105 0805105 805105 AMA805105 AMA53001666 AMA56001475

Genuine ACP M0805105 12A Fuse | OEM Part Number: M0805105

This 12A glass-tube fuse is listed for compatible ACP, Amana, and Menumaster commercial microwave and high-speed combination oven models. It opens the circuit during an overcurrent condition to help protect the appliance. Verify the full appliance model and fuse specification before ordering.

Technical Specifications

Symptoms Fixed by Replacing M0805105

• Complete loss of power: Display is dark and controls do not respond.
• No heat or failure to start: Lights or display turn on, but the cooking cycle will not begin or stops mid-cycle.
• Power interruption: Unit cuts out or a fuse or breaker trips during a high-power cycle.
• Visible fuse damage: Blackened glass, burn marks, or a broken filament.

Repeated fuse failure can indicate another electrical fault and should be diagnosed by a qualified service technician.

Key Product Benefits

• ACP OEM fuse identified by part number M0805105.
• 12 A fuse rating for the listed commercial equipment.
• Cross-reference numbers and model information are included to help verify fitment.

Part Compatibility & Cross-Reference Numbers

Listed part numbers: M0805105, AMAM0805105, AMA0805105, 0805105, 805105, AMA805105, AMA53001666, AMA56001475.

Compatible brands listed: ACP, Amana, Menumaster.

• XpressChef / AXP Series: AXP22T, AXP20, AXP22TLT-P2005602M, ARX1-P2005701M
• MXP Series: MXP22QTT-P2006809M, MXP22BFT-P2004227M, MXP22SFTN-P2006837M, MXP5221T-P2005621M, MXP22DMT-P2006807M
• MRX Express Series: MRX52BL (P2006615M), MRX2SW (P2006645M)
• MSO / RFS / DECS / MC Series: MSO5211-P2003927M, RFS18TS-P2001003M, DECS11MA-P1330217M, MC23MPT-P1329605M, MC23MPTW2-P2001808M, RCS10MPA-P2000704M, US11EA-P1330229M

Please verify fitment using your appliance’s full model number before purchasing.

Step-by-Step Installation Instructions

Safety warning: Commercial microwaves contain high-voltage components that may retain a dangerous charge after power is disconnected. Installation should be performed by a qualified service technician following the manufacturer’s service procedure. Do not attempt to discharge or handle high-voltage components unless properly trained.

1. Confirm the appliance’s full model number and the required fuse specification in the service documentation.
2. Disconnect power according to the manufacturer’s safety and lockout procedures.
3. Have a qualified technician access the fuse assembly and follow the prescribed high-voltage safety procedure.
4. Remove the failed fuse only after the equipment has been made safe using the manufacturer’s procedure.
5. Install the specified M0805105 fuse; do not substitute a different rating.
6. Reassemble the appliance and test it according to the service manual.
7. If the replacement fuse blows again or the breaker trips, stop and have the underlying fault diagnosed.