Commercial Oven Relay For: TurboChef TBC101279 101279 92S11D22D-24 30A DPDT ER101279

Commercial Oven Relay 101279

This ERP replacement relay is intended for compatible TurboChef commercial oven applications using part 101279. It is not listed as a TurboChef-manufactured part. Match the relay specifications, terminal arrangement, voltage, original part number, and complete appliance model before ordering.

• Sealed DPDT power relay, 30 Amp NO contact / 3 Amp NC contact, 24 VDC coil, Class F insulation (155 degrees C max coil temperature), 8-pin plug-in, silver alloy quick-connect terminals, panel / DIN-rail mount. Replacement for installed part numbers: TBC101279, 101279, 92S11D22D-24. Aftermarket cross-reference: ER101279 (aftermarket reference only). Verify by original relay marking, part number, voltage rating, pin layout (must be 8-pin DPDT, NOT 4-pin or 11-pin), and the 30A / 24 VDC spec before ordering.
• [FUNCTION + CIRCUIT POSITION] Multi-position sealed DPDT relay used in commercial rapid-cook convection oven control circuits. Depending on the oven model and relay slot, this part serves as: magnetron anode relay (K2 - switches power to the magnetron high-voltage transformer), monitor / safety interlock relay (K3 - shorts L1 and L2 if a door switch opens during cook), magnetron cooling fan relay (K7 - switches power to the magnetron cooling fans), or stirrer motor relay (K8 - switches power to the microwave stirrer motor). Confirm the exact relay position by consulting the oven service manual and the wiring diagram for your model.
• [COMPATIBLE WITH HHC-1618 SERIES] Compatible with HHC-1618 commercial rapid-cook convection ovens using the listed TBC101279 / 101279 relay on the K1 / K2 / K3 / K7 / K8 relay position. Verify by the currently installed relay marking and the oven service manual wiring diagram before ordering.
• [COMPATIBLE WITH HHC-2020 SERIES] Compatible with HHC-2020 commercial rapid-cook convection ovens (Gen Market 2020 series) using the listed TBC101279 / 101279 relay on the K1 / K2 / K3 / K7 / K8 relay position. Verify by the currently installed relay marking and the oven service manual wiring diagram before ordering.
• [COMPATIBLE WITH HHC-2620 SERIES] Compatible with HHC-2620 commercial rapid-cook convection ovens (conveyor belt series) using the listed TBC101279 / 101279 relay on the K1 / K2 / K3 / K7 / K8 relay position. Verify by the currently installed relay marking and the oven service manual wiring diagram before ordering.
• [COMPATIBLE WITH HHD-1002B] Compatible with HHD-1002B heavy-duty commercial rapid-cook convection ovens using the listed TBC101279 / 101279 sealed DPDT relay. Verify by the currently installed relay marking, voltage rating (24 VDC coil) and 8-pin terminal layout before ordering.
• [K2 / K3 / K7 / K8 RELAY CIRCUIT REFERENCE] This 30A sealed DPDT relay with 24 VDC coil matches the spec used in: K2 Anode relay (240 VAC, 30A, DPDT, 24 VDC coil - switches the magnetron high-voltage transformer); K3 Monitor relay (30A, DPDT, 24 VDC coil - door interlock safety circuit); K7 Magnetron Cooling Fan relay (240 VAC, 30A, DPDT, 24 VDC coil); and K8 Stirrer Motor relay (240 VAC, 30A, DPDT, 24 VDC coil). Always confirm the specific K-position in the target oven before replacement.

Product Specifications

• Appliance type: Commercial oven
• Part type: Electrical relay
• Compatible brand: TurboChef, verify the exact appliance
• Primary reference: 101279
• SKU / ERP number: ER101279
• Condition: New replacement part

Compatible Part Numbers

• 101279
• ER101279

Fixes These Symptoms

• Commercial oven component loses its intended electrical function after diagnosis
• Relay operation is intermittent or unreliable
• Relay shows visible damage or heat-related wear
• Replacement relay is required after testing confirms relay failure

Key Features and Benefits

• Replacement relay for compatible TurboChef commercial oven applications
• Helps restore the intended electrical switching function when the relay is the confirmed failed component
• Verify terminal arrangement, voltage, ratings, and wiring before installation

Compatible Models

Fits various models. Please verify compatibility with us before ordering

Compatible Brands

TurboChef. Verify the exact model and original part number before ordering.

Installation Instructions

1. Disconnect electrical power and follow the model-specific service manual.
2. Confirm the complete appliance model, original part number, relay ratings, terminal arrangement, and wiring.
3. Install the relay in the correct orientation and secure every connection according to the service instructions.
4. Complete required electrical and safety checks before returning the oven to service.

Safety: Commercial ovens contain hazardous electrical circuits. Service should be performed only by qualified personnel. Do not bypass thermal protection, interlocks, or other safety devices.

ERP replacement part. Confirm the full appliance model and original part number before ordering.

California Proposition 65: WARNING: This product can expose you to chemicals, including nickel compounds, which are known to the State of California to cause cancer. See www.P65Warnings.ca.gov.