Whirlpool Oven Range Spark Module PN-ERW11601369 JDRP436WP JLRP548WP

Oven Range Spark Module – Whirlpool

Whirlpool Oven Range Spark Module PN-ERW11601369 JDRP436WP JLRP548WP This oven range spark module controls or distributes electrical power, burner output, mixer speed, temperature, ignition, or a safety-interlock signal. It is intended as a model-specific replacement for the service part listed below. Confirm the complete appliance model and serial number before ordering. Part-Specific Details Range Oven Spark Module for JDRP436WP JLRP548WP KDRS467V KDRS483V KGCU484VS FOR MODEL: JDRP436WP02 JDRP436WP03 JDRP548WP02 JDRP548WP03 JGCP436WP01 JGCP436WP02 JGCP548WP02 JGRP436WP01 JGRP436WP02 JGRP548WP02 JLRP436WP00 JLRP436WP01 JLRP548WP00 JLRP548WP01 JDRP436WP02 JDRP436WP03 JDRP548WP02 JDRP548WP03 JGCP436WP01 JGCP436WP02 JGCP548WP02 JGRP436WP01 JGRP436WP02 JGRP548WP02 JLRP436WP01 JLRP548WP00 JLRP548WP01 KDRS462VSS00 KDRS462VSS02 KDRS462VSS03 KDRS467VBK00 KDRS467VBK01 KDRS467VBU00 KDRS467VBU01 KDRS467VMB00 KDRS467VMW00 KDRS467VMW01 KDRS467VSD00 KDRS467VSD01 KDRS467VSS03 KDRS467VSS04 KDRS467VSS05 KDRS483VBK01 KDRS483VBU01 KDRS483VMW01 KDRS483VSD01 KDRS483VSS02 KDRS483VSS03 KDRS483VSS04 KDRU767VSS03 KDRU767VSS04 KDRU783VSS02 KDRU783VSS03 KGCU462VSS00 KGCU462VSS01 KGCU462VSS02 KGCU467VSS01 KGCU467VSS02 KGCU482VSS00 KGCU482VSS01 KGCU482VSS02 KGCU483VSS01 KGCU483VSS02 KGCU484VSS00 KGCU484VSS01 KGCU484VSS02 Product Specifications Brand: Whirlpool Primary SKU: PN-ERW11601369 Product type: Oven Range Spark Module Application: model-specific oven repair Verify voltage, amperage or wattage range, shaft and stem profile, connector layout, terminal markings, mounting position, and revision Transfer wires by terminal designation; never rely only on wire color Replaces / Cross-Reference Part Numbers PN-ERW11601369, JDRP436WP, JLRP548WP, KDRS467V, KDRS483V, KGCU484VS Cross-reference numbers can identify earlier revisions, distributor references, or approved service replacements. Compatibility can vary by production date and model revision. Symptoms of Failure Burner, motor, light, or appliance will not operate output remains high or will not regulate intermittent operation control overheats, arcs, or has damaged terminals incorrect speed, ignition, or temperature Installation Instructions Disconnect power at the breaker and verify the circuit is de-energized. Photograph and label every terminal and wire, remove the control knob and mounting hardware as applicable, transfer one connector at a time by terminal designation, secure the replacement and grounding, reinstall shields and controls, restore power, and test every affected setting while monitoring for heat or arcing. Compatibility and Safety Confirm fit using the appliance rating label and Whirlpool-family parts diagram. Disconnect power and shut off water or gas when applicable, wear suitable protective equipment, preserve all shields and guards, and use a qualified technician for gas-system or unfamiliar electrical repairs.

Compatible Part Numbers

• PN-ERW11601369
• JDRP436WP
• JLRP548WP
• KDRS467V
• KDRS483V
• KGCU484VS

Key Features

• Product type: Oven Range Spark Module
• SKU / MPN: PN-ERW11601369

Fixes These Symptoms

• Burner
• motor
• light
• or appliance will not operate
• output remains high or will not regulate
• intermittent operation
• control overheats
• arcs
• or has damaged terminals
• incorrect speed
• ignition
• or temperature

Compatible Brands

• Whirlpool
• Maytag
• KitchenAid
• Amana
• Jenn-Air
• Roper
• Kenmore

Always verify your complete appliance model number before ordering.

Installation Guidance

Disconnect power at the breaker and verify the circuit is de-energized. Photograph and label every terminal and wire, remove the control knob and mounting hardware as applicable, transfer one connector at a time by terminal designation, secure the replacement and grounding, reinstall shields and controls, restore power, and test every affected setting while monitoring for heat or arcing.