Whirlpool Dryer Felt Adhesive Y055980 AP6024142 055980

Dryer Felt Adhesive – Whirlpool

Whirlpool Dryer Felt Adhesive Y055980 AP6024142 055980 This dryer felt adhesive seals the designated opening or drum edge to control airflow, heat, moisture, vibration, or contact between moving surfaces. It is intended as a model-specific replacement for the service part listed below. Confirm the complete appliance model and serial number before ordering. Part-Specific Details OEM Whirlpool Y055980 Washer High Temperature Adhesive Description This hi temp adhesive can be used on all rubber and felt seal installations. Color: white. It's a 2 oz tube. This part fixes the following symptoms Marks left on clothes Takes too long to dry Shakes and moves Cross-Reference Information Part Number WPY055980 replaces AP6024142 Y055980, 055980, 055984, 14205665, 3M847, 55980, 55984, 7-57185, 7-57186, 70102, 757185, 757186, GA601, PS11757492, Y757185, Y757186. Product Specifications Brand: Whirlpool Primary SKU: Y055980 Product type: Dryer Felt Adhesive Application: model-specific dryer repair Match profile, length, material, adhesive requirement, seam location, and mounting channel Clean the mating surface completely and inspect adjacent guides or bearings Replaces / Cross-Reference Part Numbers Y055980, AP6024142, 055980, 055984, 14205665, 3M847, 55980, 55984, 7-57185, 7-57186, 70102, 757185, 757186, GA601, PS11757492, Y757185, Y757186, WPY055980 Cross-reference numbers can identify earlier revisions, distributor references, or approved service replacements. Compatibility can vary by production date and model revision. Symptoms of Failure Air, heat, moisture, or lint leakage clothes snagging scraping or thumping loose or torn felt visible gap, wear, or adhesive failure Installation Instructions Disconnect power and shut off gas when applicable. Access the seal, record its seam and orientation, remove old material and adhesive residue, clean and dry the surface, apply the specified adhesive where required, seat the replacement evenly without stretching, allow full curing time, rotate the drum or door by hand, then reassemble and test. Compatibility and Safety Confirm fit using the appliance rating label and Whirlpool-family parts diagram. Disconnect power and shut off water or gas when applicable, wear suitable protective equipment, preserve all shields and guards, and use a qualified technician for gas-system work or unfamiliar electrical repairs.

Compatible Part Numbers

• Y055980
• AP6024142
• 055980
• 055984
• 14205665
• 3M847
• 55980
• 55984
• 7-57185
• 7-57186
• 70102
• 757185
• 757186
• GA601
• PS11757492
• Y757185
• Y757186
• WPY055980

Key Features

• Product type: Dryer Felt Adhesive
• SKU / MPN: Y055980

Fixes These Symptoms

• Air
• heat
• moisture
• or lint leakage
• clothes snagging
• scraping or thumping
• loose or torn felt
• visible gap
• wear
• or adhesive failure

Compatible Brands

• Whirlpool

Always verify your complete appliance model number before ordering.

Installation Guidance

Disconnect power and shut off gas when applicable. Access the seal, record its seam and orientation, remove old material and adhesive residue, clean and dry the surface, apply the specified adhesive where required, seat the replacement evenly without stretching, allow full curing time, rotate the drum or door by hand, then reassemble and test.