Whirlpool Dryer Gas Valve Coil Kit 279834 AP3094251 12001349

Dryer Gas Valve Coil Kit – Whirlpool

Whirlpool Dryer Gas Valve Coil Kit 279834 AP3094251 12001349 This dryer gas valve coil kit restores the correct support, alignment, retention, movement, user control, or physical protection of the related appliance assembly. It is intended as a model-specific replacement for the service part listed below. Confirm the complete appliance model and serial number before ordering. Part-Specific Details OEM Original Whirlpool WP279834 Dryer Gas Valve Solenoid Kit AP3094251 PS334310 Specifics: The 279834 Gas Valve Ignition Solenoid Coil Kit is an M series new style coil kit, used in gas dryers. When the igniter reaches a high enough temperature, these coils work together to let the gas enter the dryer. The coils open the gas valve; if the valve does not open the heating element will not ignite. Both coils must be operational for the valve to open. This is a safety mechanism to ensure that there are no unsafe buildups of gas inside your appliance. This kit comes with a three-terminal boost/hold coil, and a two-terminal main coil. Each part is approximately 1 1/4 inches in diameter. Works with most top name brands: Whirlpool, Kenmore, Maytag, Roper, KitchenAid, Amana, Magic Chef, Crosley, Speed Queen, Estate, Admiral, Norge, Inglis, Jenn-Air, Hoover, International. Fixes the following symptoms: No heat or not enough heat. Takes too long to dry. Shuts off too soon. Timer will not advance. Replaces: AP3094251, 279834, 12001349, 14201336, 14201452, 14202750, 14205025, 14210032, 14210725, 14210908, 279834BULK, 279834VP, 3-6105, 3-6106, 303558, 306103, 306105, 306106, 3479, 58804A, 58804B, 63-6614, 63-6615, 694539 Product Specifications Brand: Whirlpool Primary SKU: 279834 Product type: Dryer Gas Valve Coil Kit Application: model-specific dryer repair Verify side, color, finish, dimensions, orientation, shaft or fastener geometry, and included hardware Inspect mating hinges, catches, rails, panels, or mounting points for damage Replaces / Cross-Reference Part Numbers 279834, AP3094251, 12001349, 14201336, 14201452, 14202750, 14205025, 14210032, 14210725, 14210908, 279834BULK, 279834VP, 3-6105, 3-6106, 303558, 306103, 306105, 306106, 3479, 58804A Cross-reference numbers can identify earlier revisions, distributor references, or approved service replacements. Compatibility can vary by production date and model revision. Symptoms of Failure Door, drum, panel, handle, knob, or related assembly sags, binds, rattles, will not latch, moves unevenly, or has cracked, loose, worn, or missing hardware Installation Instructions Disconnect power and shut off gas or water when applicable. Photograph the original orientation and hardware order, support the assembly, release clips or fasteners without forcing surrounding plastic or glass, transfer reusable hardware, align the replacement squarely, tighten evenly, and cycle the component by hand before restoring operation. Compatibility and Safety Confirm fit using the appliance rating label and Whirlpool-family parts diagram. Disconnect power and shut off water or gas when applicable, wear suitable protective equipment, preserve all shields and guards, and use a qualified technician for gas-system work or unfamiliar electrical repairs.

Compatible Part Numbers

• 279834
• AP3094251
• 12001349
• 14201336
• 14201452
• 14202750
• 14205025
• 14210032
• 14210725
• 14210908
• 279834BULK
• 279834VP
• 3-6105
• 3-6106
• 303558
• 306103
• 306105
• 306106
• 3479
• 58804A

Key Features

• Product type: Dryer Gas Valve Coil Kit
• SKU / MPN: 279834

Fixes These Symptoms

• Door
• drum
• panel
• handle
• knob
• or related assembly sags
• binds
• rattles
• will not latch
• moves unevenly
• or has cracked
• loose
• worn
• or missing hardware

Compatible Brands

• Whirlpool

Always verify your complete appliance model number before ordering.

Installation Guidance

Disconnect power and shut off gas or water when applicable. Photograph the original orientation and hardware order, support the assembly, release clips or fasteners without forcing surrounding plastic or glass, transfer reusable hardware, align the replacement squarely, tighten evenly, and cycle the component by hand before restoring operation.