Whirlpool Oven Range Oven Igniter W10918546 AP6037202 98005652

Oven Range Oven Igniter – Whirlpool

Whirlpool Oven Range Oven Igniter W10918546 AP6037202 98005652 This oven range oven igniter supports safe gas flow, burner ignition, flame distribution, grate stability, or fuel-type configuration. It is intended as a model-specific replacement for the service part listed below. Confirm the complete appliance model and serial number before ordering. Part-Specific Details OEM Whirlpool W1014061 Range Oven Igniter Part Number W10918546 replaces AP6037202 98005652, WPW10140611, W10140611, PS11770066, W10918546VP. Whirlpool SF315PEKW0 Whirlpool SF310PEKW0 Roper FGP305KW3 Whirlpool SF315PEKQ0 Whirlpool SF315PEPW1 Whirlpool SF315PEMW1 Whirlpool SF315PEPB1 Roper FGP305KW0 Whirlpool SF114PXSQ1 Whirlpool SF315PEPW2 Whirlpool SF315PEKB1 Whirlpool SF3020EKQ3 Whirlpool SF310PEKW1 Whirlpool SF315PEPQ2 Whirlpool SF315PEPW3 Whirlpool SF114PXSB1 Whirlpool SF315PEKV0 Whirlpool SF310PEKQ0 Whirlpool SF315PEMQ1 Whirlpool SF315PEPW0 Whirlpool SF111PXSQ1 Whirlpool SF114PXSW0 Whirlpool SF303PEKW0 Whirlpool SF315PEKQ1 Whirlpool SF315PEPQ4 Whirlpool SF315PEMB1 Roper FGP305KW5 Roper FGP325KW0 Whirlpool SF310PEKQ1 Whirlpool SF315PEPB2 Whirlpool SF315PEPQ1 Roper FGP305KW4 Whirlpool SF114PXSW1 Whirlpool SF3020EKW0 Estate TGP305TQ0 Roper FGP305KW2 Whirlpool SF114PXSQ0 Roper FGP305KN0 Whirlpool SF110AXSQ1 Roper FGP305KW6 Roper FGP337KW0 Whirlpool SF114PXSB0 Whirlpool SF114PXSQ2 Whirlpool SF114PXST1 Whirlpool SF216LXSQ0 Whirlpool SF303PEKQ0 Whirlpool SF303PEKW2 Whirlpool SF310PEKN0 Whirlpool SF315PEPQ3 Whirlpool SF315PEPT1 Estate TGP305RW2 Roper FGP305KW1 Whirlpool SF110AXSQ0 Whirlpool SF111PXSQ0 Whirlpool SF3020EKQ2 Roper FGP305KV3 Whirlpool SF114PXSW2 Whirlpool SF3020EKQ4 Whirlpool SF3020EKW1 Whirlpoo Product Specifications Brand: Whirlpool Primary SKU: W10918546 Product type: Oven Range Oven Igniter Application: model-specific oven repair Verify burner position, cap diameter, finish, fuel type, orifice or coil specification, connector style, and kit contents Inspect burner ports, gas fittings, grounding, igniter alignment, and flame pattern Replaces / Cross-Reference Part Numbers W10918546, AP6037202, 98005652, WPW10140611, W10140611, PS11770066, W10918546VP Cross-reference numbers can identify earlier revisions, distributor references, or approved service replacements. Compatibility can vary by production date and model revision. Symptoms of Failure Burner will not ignite or lights slowly uneven, yellow, lifting, or noisy flame repeated clicking gas valve will not open reliably cap rocks, grate is unstable, or fuel conversion is incorrect Installation Instructions Disconnect electrical power and shut off the gas supply. Allow all surfaces to cool, document burner and wiring locations, transfer only the parts specified for the model and fuel type, seat burner caps flat and centered, secure igniters without stressing ceramic, leak-test every disturbed gas fitting with an approved solution, restore power, and verify ignition and flame quality at each burner. Compatibility and Safety Confirm fit using the appliance rating label and Whirlpool-family parts diagram. Disconnect power and shut off water or gas when applicable, wear suitable protective equipment, preserve all shields and guards, and use a qualified technician for gas-system or unfamiliar electrical repairs.

Compatible Part Numbers

• W10918546
• AP6037202
• 98005652
• WPW10140611
• W10140611
• PS11770066
• W10918546VP

Key Features

• Product type: Oven Range Oven Igniter
• SKU / MPN: W10918546

Fixes These Symptoms

• Burner will not ignite or lights slowly
• uneven
• yellow
• lifting
• or noisy flame
• repeated clicking
• gas valve will not open reliably
• cap rocks
• grate is unstable
• or fuel conversion is incorrect

Compatible Brands

• Whirlpool
• Maytag
• KitchenAid
• Amana
• Jenn-Air
• Roper
• Kenmore

Always verify your complete appliance model number before ordering.

Installation Guidance

Disconnect electrical power and shut off the gas supply. Allow all surfaces to cool, document burner and wiring locations, transfer only the parts specified for the model and fuel type, seat burner caps flat and centered, secure igniters without stressing ceramic, leak-test every disturbed gas fitting with an approved solution, restore power, and verify ignition and flame quality at each burner.