Whirlpool Dryer Blower Wheel 33001790 AP4043265 PS2035614

Dryer Blower Wheel – Whirlpool

Whirlpool Dryer Blower Wheel 33001790 AP4043265 PS2035614 This genuine Whirlpool blower wheel mounts on the dryer drive-motor shaft and moves heated air through the drum and exhaust system. Proper blower operation supports even drying, temperature control, and safe airflow. Product Specifications Brand: Whirlpool Primary SKU: 33001790 Product type: Dryer Blower Wheel Construction: white molded plastic with 20 fins Approximate diameter: 8 to 8-3/8 inches Approximate width: 3-1/8 inches Motor-shaft fit: 3/8-inch D-shaped hub Spring clamp is not included Application: compatible Whirlpool and Maytag dryers and washer/dryer combinations Replaces / Cross-Reference Part Numbers 33001790, 516674, AP4043265, AH2035614, EA2035614, EAP2035614, PS2035614, AWP40062, PD00003070 Symptoms of Failure Unusual, loud, grinding, scraping, or rattling noise weak airflow dryer takes too long to dry clothes remain damp insufficient or no heat caused by poor airflow blower wheel is cracked, loose, obstructed, or wobbling. Installation Instructions Disconnect electrical power and shut off gas on gas models. Remove the dryer access panels and drum as directed by the model-specific service manual. Document belt routing and wiring. Hold the motor shaft using the approved method, remove the blower wheel and any retaining clamp, clean lint from the housing, install the new wheel with the correct D-shaped hub orientation, verify housing clearance and free rotation, reinstall the drum, belt, and all guards, restore utilities, and run a monitored test cycle. Compatibility and Safety Verify the complete model number and compare shaft style, wheel dimensions, and housing clearance. Disconnect power and gas before service. Correct any lint restriction or motor-shaft damage that contributed to failure.

Compatible Part Numbers

• 33001790
• 516674
• AP4043265
• AH2035614
• EA2035614
• EAP2035614
• PS2035614
• AWP40062
• PD00003070

Key Features

• Product type: Dryer Blower Wheel
• SKU / MPN: 33001790

Fixes These Symptoms

• Unusual
• loud
• grinding
• scraping
• or rattling noise
• weak airflow
• dryer takes too long to dry
• clothes remain damp
• insufficient or no heat caused by poor airflow
• blower wheel is cracked
• loose
• obstructed
• or wobbling.

Compatible Brands

• Whirlpool

Always verify your complete appliance model number before ordering.

Installation Guidance

Disconnect electrical power and shut off gas on gas models. Remove the dryer access panels and drum as directed by the model-specific service manual. Document belt routing and wiring. Hold the motor shaft using the approved method, remove the blower wheel and any retaining clamp, clean lint from the housing, install the new wheel with the correct D-shaped hub orientation, verify housing clearance and free rotation, reinstall the drum, belt, and all guards, restore utilities, and run a monitored test cycle.