Whirlpool Dryer Gas Valve Coil Kit 279834 AP3094251 12001349

Dryer Gas Valve Coil Kit – Whirlpool

Whirlpool Dryer Gas Valve Coil Kit 279834 AP3094251 12001349 This dryer gas valve coil kit supports safe gas flow, burner ignition, flame distribution, grate stability, or fuel-type configuration. It is intended as a model-specific replacement for the service part listed below. Confirm the complete appliance model and serial number before ordering. Part-Specific Details Genuine Whirlpool WP279834 Dryer Gas Valve Solenoid Kit Specifics: The WP279834 Gas Valve Ignition Solenoid Coil Kit is an M series new style coil kit, used in gas dryers. When the igniter reaches a high enough temperature, these coils work together to let the gas enter the dryer. The coils open the gas valve; if the valve does not open the heating element will not ignite. Both coils must be operational for the valve to open. This is a safety mechanism to ensure that there are no unsafe buildups of gas inside your appliance. This kit comes with a three-terminal boost/hold coil, and a two-terminal main coil. Each part is approximately 1 1/4 inches in diameter. Works with most top name brands: Whirlpool, Kenmore, Maytag, Roper, KitchenAid, Amana, Magic Chef, Crosley, Speed Queen, Estate, Admiral, Norge, Inglis, Jenn-Air, Hoover, International. Fixes the following symptoms: No heat or not enough heat. Takes too long to dry. Shuts off too soon. Timer will not advance. Fits Whirlpool, Kenmore, Maytag, Admiral, Crosley, Frigidaire, Estate, Amana, Kitchen Aid, GE, Hotpoint, Roper, White Westinghouse, Sears and others. Replaces: AP3094251, 279834, 12001349, 14201336, 14201452, 14202750, 14205025, 14210032, 14210725, 14210908, 279834BULK, 279834VP, 3-6105, 3-6106, 303558, 306103, 306105, 306106, 3479, 58804A, 5880 Product Specifications Brand: Whirlpool Primary SKU: 279834 Product type: Dryer Gas Valve Coil Kit Application: model-specific dryer repair Verify burner position, cap diameter, finish, fuel type, orifice or coil specification, connector style, and kit contents Inspect burner ports, gas fittings, grounding, igniter alignment, and flame pattern Replaces / Cross-Reference Part Numbers 279834, AP3094251, 12001349, 14201336, 14201452, 14202750, 14205025, 14210032, 14210725, 14210908, 279834BULK, 279834VP, 3-6105, 3-6106, 303558, 306103, 306105, 306106, 3479, 58804A, 58804B, 63-6614 Cross-reference numbers can identify earlier revisions, distributor references, or approved service replacements. Compatibility can vary by production date and model revision. Symptoms of Failure Burner will not ignite or lights slowly uneven, yellow, lifting, or noisy flame repeated clicking gas valve will not open reliably cap rocks, grate is unstable, or fuel conversion is incorrect Installation Instructions Disconnect electrical power and shut off the gas supply. Allow all surfaces to cool, document burner and wiring locations, transfer only the parts specified for the model and fuel type, seat burner caps flat and centered, secure igniters without stressing ceramic, leak-test every disturbed gas fitting with an approved solution, restore power, and verify ignition and flame quality at each burner. Compatibility and Safety Confirm fit using the appliance rating label and Whirlpool-family parts diagram. Disconnect power and shut off water or gas when applicable, wear suitable protective equipment, preserve all shields and guards, and use a qualified technician for gas-system or unfamiliar electrical repairs.

Compatible Part Numbers

• 279834
• AP3094251
• 12001349
• 14201336
• 14201452
• 14202750
• 14205025
• 14210032
• 14210725
• 14210908
• 279834BULK
• 279834VP
• 3-6105
• 3-6106
• 303558
• 306103
• 306105
• 306106
• 3479
• 58804A
• 58804B
• 63-6614

Key Features

• Product type: Dryer Gas Valve Coil Kit
• SKU / MPN: 279834

Fixes These Symptoms

• Burner will not ignite or lights slowly
• uneven
• yellow
• lifting
• or noisy flame
• repeated clicking
• gas valve will not open reliably
• cap rocks
• grate is unstable
• or fuel conversion is incorrect

Compatible Brands

• Whirlpool
• Maytag
• KitchenAid
• Amana
• Jenn-Air
• Roper
• Kenmore

Always verify your complete appliance model number before ordering.

Installation Guidance

Disconnect electrical power and shut off the gas supply. Allow all surfaces to cool, document burner and wiring locations, transfer only the parts specified for the model and fuel type, seat burner caps flat and centered, secure igniters without stressing ceramic, leak-test every disturbed gas fitting with an approved solution, restore power, and verify ignition and flame quality at each burner.