Samsung Dryer Moisture Sensor DC97-08889A

Dryer Moisture Sensor – Samsung

Samsung Dryer Moisture Sensor DC97-08889A This dryer moisture sensor detects residual moisture as clothing contacts the sensing surfaces and provides feedback used by the control during automatic drying cycles. It helps the dryer adjust cycle duration and prevent damp loads or unnecessary overdrying. Verify the complete dryer model, sensor style, guide, connector, and mounting details before ordering. Part-Specific Details OEM Samsung DC97-08889A Dryer Moisture Sensor Guide Cross Reference Information Part Number DC97-08889A replaces AP4210309 2075741, PS4219132. Product Specifications Brand: Samsung Primary SKU: DC97-08889A Product type: Dryer Moisture Sensor Application: model-specific dryer repair Verify dimensions, connector or mounting geometry, orientation, and revision against the original Electrical rating, terminal layout, and control revision must match the original Replaces / Cross-Reference Part Numbers DC97-08889A Cross-reference numbers may identify earlier revisions, distributor references, or approved service replacements. Compatibility can vary by production date and model revision. Symptoms of Failure Automatic sensor cycle ends too early while clothes are still damp cycle runs too long or overdrys clothing dryer only works normally on timed dry moisture-sensing error or inconsistent cycle times sensor bars, guide, connector, or wiring are coated, worn, broken, or open Installation Instructions Disconnect electrical power and, for gas dryers, shut off the gas supply. Access the moisture-sensor bars or sensor guide at the front bulkhead/lint-duct area as directed by the service manual. Photograph wiring and orientation, clean residue from the sensing surfaces, replace the sensor or guide without bending contacts, reconnect terminals firmly, and reassemble all airflow panels before testing an automatic cycle. Compatibility and Safety Confirm fit using the appliance rating label and Samsung parts diagram. Disconnect power and shut off water or gas when applicable. Wear suitable protective equipment, preserve all shields and guards, and use a qualified technician for gas systems, sealed refrigeration, or unfamiliar electrical work.

Compatible Part Numbers

• DC97-08889A

Key Features

• Product type: Dryer Moisture Sensor
• SKU / MPN: DC97-08889A

Fixes These Symptoms

• Automatic sensor cycle ends too early while clothes are still damp
• cycle runs too long or overdrys clothing
• dryer only works normally on timed dry
• moisture-sensing error or inconsistent cycle times
• sensor bars
• guide
• connector
• or wiring are coated
• worn
• broken
• or open.

Compatible Brands

• Samsung

Always verify your complete appliance model number before ordering.

Installation Guidance

Disconnect electrical power and, for gas dryers, shut off the gas supply. Access the moisture-sensor bars or sensor guide at the front bulkhead/lint-duct area as directed by the service manual. Photograph wiring and orientation, clean residue from the sensing surfaces, replace the sensor or guide without bending contacts, reconnect terminals firmly, and reassemble all airflow panels before testing an automatic cycle.