
ERP
Furnace & Boiler Igniter Kit For: Carrier Trane SSN2000 LH33ZS001A IGN23 ERSSN2000
ERSSN2000
Availability
Ships Within 1-3 Business days
Part Number
ERSSN2000
MPN
ERSSN2000
Manufacturer
ERP
Compatible Brands:
Quality Parts
Easy to Install
Reliable
Long-Lasting
Furnace & Boiler Igniter Kit — SSN2000
Aftermarket silicon-nitride replacement igniter for compatible Carrier and Trane furnace or boiler applications. This is not a genuine appliance-brand OEM part. Verify the complete model number and original igniter specifications before ordering.
Part details
- ERP part number: SSN2000
- Replacement cross-reference numbers: LH33ZS001A, IGN23
- Rated voltage: 120 V, +10% / −15%, 50/60 Hz
- Cold resistance: 9–17 ohms
- Temperature at 102 V ±5 V: 1,976 °F / 1,080 °C
- Temperature at 120 V ±5 V: 2,156 °F / 1,180 °C
- Steady-state current: 0.8–2.0 A maximum at 120 V
- Igniter material: silicon nitride
- Probe length from bracket: 2.25 in.; wire length: 15.5 in.
Compatible brands
Carrier and Trane. Brand compatibility alone does not establish fit; confirm the full appliance model, mounting arrangement, ratings, and original part number.
Possible service condition
An igniter may require diagnosis when the appliance does not ignite, produces no heat, or has an ignition-related fault. Test and diagnose the complete ignition system first because other components can cause similar symptoms.
Installation and safety
Follow the appliance manufacturer's model-specific service instructions. Disconnect electrical power and shut off the gas supply before service. Allow hot components to cool. Furnace, boiler, gas, electrical, and combustion-safety work should be performed by a qualified technician. Do not bypass an ignition control, flame-sensing circuit, interlock, fuse, or other safety device. Verify safe ignition and operation according to the manufacturer's procedure before returning the appliance to service.
Replacement-part disclosure: ERP is an aftermarket replacement supplier. This product is not manufactured, sponsored, or endorsed by Carrier or Trane.
California Proposition 65: WARNING: This product can expose you to chemicals, including nickel compounds, which are known to the State of California to cause cancer. See www.P65Warnings.ca.gov.
- Installation guidance for SSN2000. This is a preparation checklist, not a model-specific service procedure.
- Confirm the complete appliance model, original igniter part number, mounting arrangement, voltage, resistance range, probe length, and wire routing before installation.
- Disconnect electrical power and shut off the gas supply. Allow the appliance to cool. Use the manufacturer's instructions for access and removal.
- Install and route the igniter exactly as specified. Keep the igniter and wiring clear of flame, sharp edges, moving parts, and hot surfaces. Do not touch or strike the silicon-nitride element.
- Reinstall shields and panels, restore supplies, and complete all manufacturer-specified ignition, flame-sensing, leak, and safety checks before returning the appliance to service.
- If the exact installation procedure, gas connection, electrical rating, or compatibility is uncertain, stop and contact the appliance manufacturer or a qualified service technician.
SSN2000 LH33ZS001A IGN23 ERSSN2000
- Appliance does not ignite or produces no heat.
- Intermittent ignition or an ignition-related fault.
- Igniter fails the applicable resistance or service test.
- Diagnose the complete ignition system before ordering.
Compatible models
Fits various models. Please verify compatibility with us before ordering.
OEM & Generic Parts
OEM Parts Authenticity Guaranteed.
