LG 6600JB3007E Refrigerator Push Button Door Switch

LG Refrigerator Push-Button Door Switch 6600JB3007E

This replacement refrigerator push-button door switch is listed under 6600JB3007E. Replace it when model-specific diagnosis confirms a faulty switch or damaged switch actuator. It is not a hinge, latch or door-support component.

Technical Specifications

Fixes These Symptoms

• Door-switch-controlled operation fails to respond correctly because of a diagnosed switch fault.
• Intermittent switch operation traced to the switch.
• Damaged switch button requires replacement of the specified switch.

A sagging door, failed latch or loose door hardware is not established as a repair application for this switch. Confirm model-specific switch functions and diagnosis.

Key Product Benefits

• Replacement for the matching refrigerator door switch.
• Existing catalog references and application identifiers retained for comparison.

Compatibility & Cross-Reference Numbers

Preserved catalog identifiers: 6600JB3007E, AP4441529, 1268250, 6600JB3007J, AH3529283, EA3529283, PS3529283. Verify any suffix substitution against the full appliance model; no universal E/J interchangeability is asserted.

Catalog-listed brands: LG, Kenmore.

Preserved catalog applications: LSC27910SB, Kenmore 31006, Kenmore 795.51019010. These applications have not been independently confirmed; verify the full model and required switch before ordering.

Step-by-Step Installation Instructions

Unplug refrigerator and verify power is disconnected. Protect stored food. Follow model-specific service instructions; use a qualified technician if diagnosis or access is unfamiliar.

1. Confirm full model, specified switch revision and diagnosed fault.
2. Disconnect power and access the switch per the manual.
3. Photograph terminal positions and switch orientation.
4. Release retainers and connectors without pulling wires or damaging surrounding surfaces.
5. Install the matching switch and connect exactly as the service sheet specifies.
6. Refit covers before restoring power and checking the functions controlled by the door switch on that model.